As a core basic component in the industrial field, alumina industrial ceramic tubes have performance highly correlated with alumina purity. Even a slight increase in purity can bring a leap-forward upgrade in performance.

As the old year gives way to the new, a glorious new chapter begins. On the occasion of the Spring Festival, Jinzhou Yunxing Industrial Ceramic Company would like to extend our most sincere festive greetings and best New Year wishes to all global partners who have long stood side by side with us and given us strong support!

Established in May 2000, Jinzhou Yunxing Industrial Ceramics Co., Ltd. (formerly Jinzhou Yunxing TechnologyDevelopment Co., Ltd.) is headquartered in the High-Tech Zone Enterprise Incubator Bullding on Yulu Street, High-TechDistrict. In April 2002, it relocated to a leased factory area of Taihe District Agricultural Industry and CommericalCorporation.

The application of the test crucible is indispensable to the test of the synchronous thermal analyzer, so how should it be selected?

The company first follows the zoning and grading strategy, adopts safe transportation methods, and arranges employees to return to work as soon as possible

In order to prolong the service life of high purity alumina furnace tubes and reduce the losses caused by damages due to improper use, the following suggestions are hereby put forward for users' reference

After the powder is formed, a biscuit with good shape is obtained, and then the biscuit is heated at a certain temperature. The biscuit undergoes volume shrinkage and finally becomes a compact sintered body. This process is called sintering. The driving force of alumina ceramic green body sintering is mainly the change of powder surface energy, that is, the surface energy of powder decreases, the surface area decreases, and the ceramic densifies. In the process of ceramic sintering densification, material transfer can be carried out through solid phase diffusion, including surface diffusion, grain boundary diffusion, lattice diffusion, etc. Normal pressure sintering is generally used in industry.

After the powder is formed, a biscuit with good shape is obtained, and then the biscuit is heated at a certain temperature. The biscuit undergoes volume shrinkage and finally becomes a compact sintered body. This process is called sintering. The driving force of alumina ceramic green body sintering is mainly the change of powder surface energy, that is, the surface energy of powder decreases, the surface area decreases, and the ceramic densifies. In the process of ceramic sintering densification, material transfer can be carried out through solid phase diffusion, including surface diffusion, grain boundary diffusion, lattice diffusion, etc. Normal pressure sintering is generally used in industry.

In the past few years, the development of industrial ceramic materials has developed to control and manipulate its specific microstructure, which will greatly expand its application scope in all walks of life. Therefore, industrial ceramics are considered to be one of the most effective materials today.

Ceramics are usually composed of commonly available materials, such as carbon, silicon, oxygen and nitrogen.