Grouting is actually an early molding method used for alumina ceramics. Because plaster molds are mainly used, the cost is relatively low, and it is also relatively easy to shape, even if the size and shape are more complex, it is easier to shape, but The key to grouting is the alumina slurry manufacturing equipment. Under normal circumstances, water is used as the main medium of the solvent. After that, the binder and debonding agent are added, and the exhaust is exhausted after sufficient grinding. It is poured into the plaster mold, because the capillary of the plaster mold will absorb the moisture, and the slurry will solidify in the plaster mold relatively quickly. If required, the excess material needs to be poured out, but in order to reduce the amount of shrinkage of the green body, we should try to use a relatively high-concentration slurry.

In fact, there are many types of alumina ceramics. If they are classified according to the main content of alumina, alumina ceramics can be divided into many types. Let’s learn about the characteristics and characteristics of the next several different alumina ceramics. Use it!

Alumina ceramics are more and more widely used, and the wear on the industrial stamping elbow is the main factor affecting the entire safety production. In order to effectively reduce the wear failure caused by the entire industry for stamping elbows, many new materials and more wear-resistant materials have emerged. However, only alumina ceramic materials are actually used. Because alumina ceramics is very good in wear resistance, the main thing is that its hardness is relatively high. It is only used in the industrial stamping elbow industry, and it is also widely used in many other aspects.

The application of alumina ceramics in modern society has surpassed our imagination, and its application has become more and more extensive. It has met our daily needs and special performance needs. Since the application of alumina ceramics is so extensive, let us take a look at the hardness of alumina ceramics.

Alumina ceramics actually uses alumina as the main material, a ceramic product produced by the manufacturer or produced, and is mainly used in thick film integrated circuits. Moreover, alumina is very good in conductivity, high temperature resistance and mechanical strength, but when using alumina ceramics, the most important thing to pay attention to is the ultrasonic cleaning.

Sintering is one of the processes in the production of alumina ceramics. So what changes will occur in alumina ceramics before sintering, during sintering, and after sintering?

The first is alumina ceramics, because alumina ceramics have good mechanical strength, conductivity and high temperature resistance. However, when cleaning alumina ceramics, you must choose the ultrasonic cleaning method, and alumina ceramics​ actually belong to The most widely used ceramic is mainly because of its superior performance, and its application in the current market is becoming more and more extensive. It can not only effectively meet the daily use, but also meet some special needs.

1, alumina ceramic pipe: all kinds of wear-resistant, high-temperature ceramic lined pulverized coal, tailings, slag slurry, slurry pipeline, elbow, elbow tube, pulverized coal burner, coal mill export, coarse and fine powder cyclone separator, chute, hopper, storage bin, mine magnetic separator beneficiation barrel body;

Where alumina ceramics are applied I. Iron and steel plant: 1. Lining of cylinder mixer of sintering machine 2, drum package ceramic rubber 3. Fan impeller 4, disc feeder, dry trough 5, coke hopper, converter bin, coke tank weighing hopper, cyclone dust collector

With the continuous development of science and technology, the use of alumina ceramic tube is more and more widely, alumina ceramic tube will be dirty for a long time, so how to do the alumina ceramic tube dirty?