Alumina ceramics is an industrial ceramic material that uses alumina as the main material and is manufactured through a specific process. Because alumina ceramics far outperform traditional metal materials in terms of conductivity, high temperature resistance and mechanical strength, they are popular and recognized. Therefore, industrial alumina ceramics are mainly used in thick film integrated circuits.

1. Strong wear resistance. According to research and investigation, the high wear resistance and ultra-high molecular weight of alumina ceramics can reach more than one million, with a high wear resistance index, which is twice the wear resistance of ordinary steel alloys. The most important corrosion resistance of alumina ceramics greatly increases the service life of alumina ceramic tubes.

1. Wear resistance, corrosion resistance, high temperature resistance and drop resistance. 2. Overall quality assurance, no material adulteration, and enhanced toughness. 3. The product is non-toxic, tasteless, and can be used without cleaning; it is widely used in industries, machinery, electronics, automobiles and other fields. 4. Super-hard ceramic rods are not easy to break during industrial use, high temperature resistance during mixed production, and easy to use.

In order to improve the accuracy of the product, some alumina ceramic materials need to be further processed after the sintering process is completed, so as to achieve a higher surface finish. But alumina ceramics is not an ordinary material after all, how can its finishing treatment be better?

Jinzhou Yunxing Industrial Ceramics Co., Ltd. Due to the increase in business volume and product categories, the company built a new factory. Now the appearance of the office building of the new factory has been completed.

(1) Easy to wash and keep clean. The glazed surface of the alumina ceramic crucible is bright and delicate, and it is easy to wash away after being contaminated. (2) Porcelain has very few pores and low water absorption. Use alumina ceramic crucible to store the solution. After the mouth is tightly sealed, it can prevent the solution from volatilization, penetration and external bacteria.

The current application of alumina ceramics in the market has far exceeded our expectations. The overall application of alumina ceramics is becoming more and more extensive, because it can not only meet the needs of our daily life, but also meet the needs of some special properties, although The application of alumina ceramics in modern society has been very extensive, so what are the main principles for choosing high-quality alumina ceramic rods? The following is introduced by the staff of Jinzhou Yunxing Industrial Ceramics Factory:

The ceramic material developed earlier is alumina ceramics. This material is resistant to high temperature and corrosion. It is an excellent and commonly used material. The material can be used to replace metal substances and extend the service life of the equipment. Increase the use of power.

Alumina ceramic tube sintering is a key stage of ceramic preparation, and the sintering atmosphere has a great influence on the preparation of ceramic materials. Too high sintering temperature or too long holding time will promote crystal growth, so that the fine raw materials will develop into coarse grains at high temperature, and the amount of liquid phase will increase. This will not only decrease the strength, but also weaken the wear resistance. Of course, if the temperature is too low, the sintered body will not be dense, and the wear resistance of the product will not be good.

Production practice and a large number of studies show that: low porosity, high density alumina ceramics have excellent structural properties. High density means that the crystal grains in the ceramic body are tightly arranged, and it is not easy to form destructive breakthrough points when subjected to external loads or corrosive substances.