Alumina Ceramic Ring Slice
My factory looking for distributors
Advantages of Alumina Ceramic Ring Slice
1. Alumina ceramic ring slice Large hardness
Alumina ceramic ring slice Measured by professional research institutes, its Loss hardness is HRA80-90, second only to diamond, and Alumina ceramic ring slice wear resistance far exceeds wear-resistant steel and stainless steel.
2. Alumina ceramic ring slice good wear resistance
Alumina ceramic ring slice its wear resistance is equivalent to 266 times that of manganese steel and 171.5 times that of high-chromium cast iron.
3. Lightweight
Its density is 3.5g/cm3, which is only half of steel, which can greatly reduce the equipment load.
Applications of Alumina Ceramic Ring Slice
1. Alumina eramic ring slice is a very wear-resistant precision ceramic material.
2. Alumina eramic ring slice which is widely used in electronics, steel, smelting, machinery, coal, mining.
3. Alumina eramic ring slice which is widely used in chemical, medical, military, aviation, photovoltaic semiconductor and other fields.
4. Companies with a lot of mechanical equipment wear can choose different types of products according to different needs.
Size,Performance index
Alumina ceramic performance index (Notice of Correct in Leakeage Rate)
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6/℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.
There ars 3pcs 1800 ° C high-temperature kilns ,2pcs 1400 ° C low-temperature kilns produced by our company independently. There are slip casting(main),and extrusion molding,injection molding etc other molding technologies,which can satisfy the produvtion requirements of various specific ceramics products.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
Certificates
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.