Alumina Ceramic Tray

  • Alumina Ceramic Tray
  • Alumina Ceramic Tray
  • Alumina Ceramic Tray
  • Alumina Ceramic Tray
  • Alumina Ceramic Tray
  • video
Alumina Ceramic Tray
  • YUNXING
  • China Jinzhou
  • 5-30 Days
  • 2,000-3,000/month(Looking for distributors)

A. Alumina ceramic plates have the characteristics of high density, good wear resistance, corrosion resistance and high chemical stability.
B. It is widely used in the fields of peeling machine blade, textile industry guide wire wheel, ceramic guide rail and so on.

Alumina Ceramic Tray


 My factory looking for distributors.


Alumina ceramic discs have been fired at a high temperature of 1800 degrees; they have good fire resistance; heat resistance;  Alumina Ceramic Tray are widely used in chemical experiment projects. The raw material of alumina ceramic disc is alumina ceramic. It is a ceramic with a wide range of uses. Because of its superior performance, it has been increasingly used in modern society to meet the needs of daily use and special performance.

Industrial Ceramic


Application of alumina ceramic tray


Alumina ceramic tray is often used in chemical and physical grinding environment, especially high purity alumina is a very good material for producing wear-resistant components. 


These components include shafts, pistons, bearings and mating end face seals. They are mainly used in chemical and physical conditions and are good corrosive media. These components can be used to manufacture circulating pumps, reciprocating pumps and resonator-supported products. 


We use ceramic injection molding and grinding to produce a variety of complex components with strict surface finish and flatness requirements. At the same time, our manufacturing process can also meet the requirements of small and batch production. 


Alumina ceramic tray is often used in water resources management, medical treatment, automobiles, telecommunications and household appliances applications.

 

Alumina Ceramic


We only make high purity alumina ceramics


1. High-purity alumina content 99.3% -99.5%, other alumina ceramics 92% -99%.


2. The color of high purity alumina product is milky white, and other products are pink or white. The higher the purity, the more transparent the color.


3. Alumina is a refractory material, the higher the purity, the better the refractory effect


4. After high-purity alumina ceramics are fired and cooled in a 1800-degree high-temperature kiln, the products are not easy to break when they encounter high temperatures. Other ceramics are fired at 1500 ℃ ~ 1800 ℃.


5. The volume density of high-purity alumina> 3.92 g / cm3 has a smooth surface and is not easily corroded by chemicals. The bulk density of other ceramics is> 3.70 g / cm3 ~> 3.85 g / cm3.


6. High purity alumina has good hardness and good wear resistance.


7. High purity alumina products have a longer service life.


Alumina ceramic performance index  (Notice of Correct in Leakeage Rate)

NO.

Property

Unit

Alumina

1

Al2O3

%

>99.3

2

SiO2

%

3

Density

g/cm3

3.88

4

Water absorption

%

0.01

5

Compressive strength

MPa

2300

6

20℃ leakage rates

TorrL/sec

>10-11=1.33322×10-12Pam3/sec

7

Twisting in high temperature

mm

0.2 allowed in 1600℃

8

Bonding in high temperature


not bonded in 1600℃

9

20—1000℃ coefficient of thermal expansion

mm.10-6/℃.m

8.2

10

Thermal conductivity

W/m.k

25

11

Electric insulation strength

KV/mm

20

12

20℃direct current

insulation resistance

Ohm/cm

1014

13

High-temperature

insulation resistance

1000℃ MΩ

≥0.08

1300℃ MΩ

≥0.02

14

Thermal shock resistance


4 times not cracked in 1550℃

15

Maximum working temperature

1800

16

Hardness

Mohs

9

17

Flexural strength

Mpa

350

 

Our factory

Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.

The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.

The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.


FAQ
1. Incoterm: FOB, CFR, CIF;
2. Delivery Cost: It is determinated by the destination port;
3. Payment Term: PayPal; T/T; 
4. Shipment: by sea, by air, by courier, by post, etc.

5. We accept customization.

6.We have professional designers.

7.We have a professional after-sales department to answer your questions.


Feedback

Alumina Ceramic Tray

 

ISO9001
ISO9001
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right