Aluminium Oxide Ceramic Plate

- YUNXING
- China Jinzhou
- 5-30 Days
- 2,000-3,000/month(Looking for distributors)
A. The bending strength of alumina ceramic plates can reach 250Mpa, and the hot-pressed products can reach 500Mpa. Mohs hardness can reach 9, plus excellent wear resistance.
B. It is widely used in steel mills, thermal power plants, cement plants, docks, and mines.
Aluminium Oxide Ceramic Plate
My factory looking for distributors.
Aluminium oxide ceramic plate is also called wear-resistant alumina ceramic sheet, high alumina ceramic sheet, wear-resistant ceramic sheet, alumina ceramic patch. Alumina ceramic sheet is mainly made of AL2O3 as raw material, rare metal oxide as solvent and calcined at 1700℃.
Alumina ceramic plate has good hardness, good endurance, and light weight. Therefore, alumina ceramic plate can be more conducive to the production of different crafts or important internal parts of the product, without increasing the weight of the product itself. Quality performance.
Aluminium Oxide Ceramic Plate manufacturers claim that it is because of this light weight advantage that they can reduce the overall load of the equipment for processing and molding, and can more effectively control the use between different products.
USES of aluminium oxide ceramic plate:
Aluminium oxide ceramic plate is often used in chemical and physical grinding environment, especially high purity alumina is a very good material for producing wear-resistant components.
These components include shafts, pistons, bearings and mating end face seals. They are mainly used in chemical and physical conditions and are good corrosive media. These components can be used to manufacture circulating pumps, reciprocating pumps and resonator-supported products.
We use ceramic injection molding and grinding to produce a variety of complex components with strict surface finish and flatness requirements. At the same time, our manufacturing process can also meet the requirements of small and batch production.
Aluminium oxide ceramic plate is often used in water resources management, medical treatment, automobiles, telecommunications and household appliances applications.
Recommended products
Perforated pipe:
A wire sleeve used for thermocouples.High temperature resistance, insulation, high temperature stability Qualitative good,
one-point numerous-temperature is aiso realizable in porous ceramic insulators.
Ceramic tray:
Corrosion resistance, high fire resistance and good chemical stability.
Used in laboratory extraction, burning, mineral, chemical and other industries.
Alumina ceramic performance index (Notice of Correct in Leakeage Rate)
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6/℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.
The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: Alumina ceramic
3. Lead time: pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T;
7. Shipment: by sea, by air, by courier, by post, etc.
8. We accept customization.
9.We have professional designers.
10.We have a professional after-sales department to answer your questions.
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.