Laboratory Test Crucible

Laboratory Test Crucible

 My factory looking for distributors.

1. Laboratory Test Crucible is also an alumina ceramic crucible made of high-purity alumina, with an alumina content greater than 99%.

2. Laboratory Test Crucible for Chemical Corrosion Resistance.

3. Laboratory Test Crucible is resistant to high temperatures, with normal use at 1600 ℃ and short-term use at 1800 ℃.

4. Laboratory Test Crucible, resistant to sudden cold and heat, not prone to cracking.

5. Laboratory Test Crucible adopts slip casting molding with high density.

1. Sample heating and melting: Laboratory Test Crucible is used to heat substances to high temperatures, promoting melting, decomposition, or evaporation.

2. Chemical reactions: Laboratory Test Crucible provides a controllable environment for chemical reactions, allowing researchers to study the transformation of substances under various conditions.

3. Ashing: Laboratory Test Crucible is used to incinerate organic materials, leaving inorganic residues for further analysis.

4. Fusion and flux: Laboratory Test Crucible facilitates the fusion of samples and fluxes, which is crucial in analytical techniques such as X-ray fluorescence (XRF) and atomic absorption spectroscopy (AAS).

5. Weight analysis: Laboratory Test Crucible serves as a container for precipitation and filtration of substances, and can accurately determine the concentration of analytes through mass measurement.

6. Maintenance and handling: Proper care and handling are crucial for maximizing the lifespan and effectiveness of Laboratory Test Crucible.

1. In our forging and experimental processes, Laboratory Test Crucible are commonly used equipment. In order to ensure the normal use of the product, it is necessary to master the correct usage method. Below is a brief introduction.

2. When there is a solid to be heated with high heat, use a crucible. When using Laboratory Test Crucible, the crucible cover is usually placed diagonally on the crucible to prevent heated objects from jumping out and allow air to freely enter and exit for possible oxidation reactions. The crucible, due to its small bottom, usually needs to be placed on a mud triangle to be heated directly by fire. The crucible can be placed directly or diagonally on an iron tripod, and can be placed on its own according to experimental needs.

Alumina ceramic performance index   (Notice of Correct in Leakeage Rate）

Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.

The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.

The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.

A: Laboratory Test Crucible is a container made of aluminum oxide undefined material, designed to withstand extremely high temperatures and used for melting and holding molten materials.

A: Laboratory Test Crucible offer excellent thermal shock resistance, excellent undefined resistance, and excellent thermal insulation. They are as wel non-reactive, non-toxic, and non-porous.

A: Laboratory Test Crucible can be used to melt metals, alloys.

1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.

2. For any other satisfaction, please also feedback to us to make our service better and better.