Alumina Ceramic Crucible For Glass Melting Experiment

- Yunxing
- China Jinzhou
- 5-30 Days
- 3,000-5,000/month(Looking for distributors)
Advantages of alumina ceramic crucible:
(1) Easy to clean and keep clean. The ceramic crucible has a bright and delicate glazed surface.
(2) There are few porcelain holes and low water absorption. The solution is stored in a sealed ceramic crucible to prevent the evaporation, penetration and intrusion of foreign bacteria.
(3) Stable chemical properties and durability. This is better than copper, iron, aluminum and other metal products.
Alumina Ceramic Crucible For Glass Melting Experiment
My factory looking for distributors.
Advantages of alumina ceramic crucible:
(1) Easy to clean and keep clean.The glaze of ceramic crucible is bright and delicate, easy to clean after dyeing.
(2) porcelain hole is very few, water absorption rate is very low.The solution is stored in sealed ceramic crucible to prevent the evaporation, penetration and invasion of foreign bacteria.
(3) stable chemical properties, durable.This point is better than copper, iron, aluminum and other metal products, ceramic crucible has a certain acid, alkali, salt and atmospheric carbonate gas erosion ability, not easy to react with these substances, not easy to rust aging.
(4) good thermal stability, slow heat transfer.Alumina ceramic crucible has a certain temperature change under the rapid cooling and rapid heat is not easy to crack performance, better than glass, is a bad conductor of heat, heat conduction is slow, used for holding boiling water or hot solution, it is not easy to hot hands.
Recommended products:
Ceramic parts
It has the characteristics of high temperature resistance, corrosion resistance, thermal shock resistance,
high mechanical strength, excellent electrical performance, etc. It is widely used in industrial equipment manufacturing and other fields.
Ceramic beads
2 bores round ceramic beads used in thermocouple could satisfy the turning,gyration,warping etc measurement requirement in complex conditions.
Alumina ceramic performance index (Notice of Correct in Leakeage Rate)
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6/℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
Inspection report