Alumina Ceramic Nut Parts
- YUNXING
- China Jinzhou
- 5-30 Days
- 1,000-2,000/month(Looking for distributors)
1.This is the alumina ceramic nut parts, it is soild screw bar, the screw size is M2. We also accept the custom size and shape about this parts.
2.Compared with common metal parts, alumina ceramic nut parts have higher hardness and strength, better wear resistance, better stability, excellent biocompatibility, etc.
3.Alumina ceramic nut parts have the characteristics of high temperature resistance, corrosion resistance, rapid cooling and rapid heat, high mechanical strength and superior electrical performance.
4.Alumina ceramic nut parts are widely used in industrial equipment manufacturing and other fields.
Alumina Ceramic Nut Parts
My factory looking for distributors.
Advantage of alumina ceramic nut parts
1.This is the alumina ceramic nut parts, it is soild screw bar, the screw size is M2. We also accept the custom size and shape about this parts.
2.Compared with common metal parts, alumina ceramic nut parts have higher hardness and strength, better wear resistance, better stability, excellent biocompatibility, etc.
3.Alumina ceramic nut parts have the characteristics of high temperature resistance, corrosion resistance, rapid cooling and rapid heat, high mechanical strength and superior electrical performance.
4.Alumina ceramic nut parts are widely used in industrial equipment manufacturing and other fields.
Application of alumina ceramic nut parts
1.Alumina ceramic nut parts can be used as protective and insulating tubes for temperature measuring instruments, thermocouples, and thermometers.
2.Alumina ceramic nut parts can be used for carbon and sulfur determination tubes in steel chemical analysis.
3.Alumina ceramic nut parts is used as the basic ceramic component for insulation instruments and components that are resistant to high temperature, acid and alkali corrosion.
Recommended products
Ceramic rods:
With high density&refractoriness,good corrosion resistence,mechanical capacity etc properties,ceramic rods are widely used in chemical fiber,textile and chemical etc industries.
Ceramic cone crucible:
Fire resistance, corrosion resistance and wear resistance.
Used in metallurgy, chemical industry, papermaking and other industries.
Performance Index as Below (Notice of Correct in Leakeage Rate）
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6／℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Composition table
| NAME | CONTENT(%) |
| Al2O3 | 99-99.3(99.5) % |
| SiO2 | 0.3-0.5 % |
| CaO+MgO | 0.2-0.3 % |
| K2O+Na2O | 0.2-0.35 % |
| Fe2O3 | <0.1 % |
| OTHER | <0.05 % |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters
The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.
The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
FAQ
1.What is the difference between ceramic and alumina?
Ceramics are non-metallic, inorganic materials that are typically composed of a combination of metallic and non-metallic elements. Alumina is a type of ceramic oxide, specifically an oxide of aluminum. It is widely used in various applications due to its excellent mechanical, thermal, and electrical properties.
2.What is alumina ceramic used for?
Everything You Need to Know about Alumina Ceramics
Because of their excellent chemical stability, alumina ceramics are used widely in acid-resistant pump impellers, pump bodies, acid-carrying pipe linings and valves. Aluminum oxide ceramics are used in the manufacture of textile wear parts and knives. This is due to their extreme hardness and wear resistance.
3.Is alumina ceramic hard?
Alumina is a very hard ceramic that is excellent at resisting abrasion and is ideal for wear-resistant inserts or products.
Certificate
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.
