Alumina Ceramic Elements Parts(accept custom)

- Yunxing
- China
- According to the quantity of the order
- 3000-5000/month
A. Alumina ceramic parts have good thermal stability, corrosion resistance, thermal shock resistance, high mechanical strength, and excellent electrical properties.
B. Widely used in industrial equipment manufacturing industry.
Alumina Ceramic Elements (accept custom)
My factory looking for distributors.
3 major factors that cause damage to alumina ceramic parts
1. External force: A major factor in the wear of alumina ceramics partsis the strong external force. Generally, it is caused by impact force and pressure during operation. It is worn or broken due to strong external forces. This is unfavorable for alumina ceramics. We should try our best to avoid collisions with objects during operation to minimize the damage.
2. The influence of the external environment: The general environmental factors include the influence of the medium in the environment, the influence of wind, the influence of temperature, etc. Sometimes the alumina ceramic parts are worn out due to long-term wind erosion. Sometimes it is caused by the slight melting of alumina ceramics caused by high temperature, causing damage. It may also be due to the impact of impurities in the environment. No matter what factors in the environment cause the wear of alumina ceramics, we must carry out maintenance and replacement parts in time to ensure normal operation.
All products through the German DIN standards: DIN43724 / DIN43725 / DIN40680
3. Excessive use time: Another reason for the wear of alumina ceramics parts is the wear after long-term use. This is caused by the time factor. Generally, we think it is a normal factor, but it needs to be replaced with a new one after excessive wear and tear.
Composition table
NAME | CONTENT(%) |
Al2O3 | 99.3-99.5(99.7) |
SiO2 | 0.3-0.5 |
CaO+MgO | 0.2-0.3 |
K2O+Na2O | 0.2-0.35 |
Fe2O3 | <0.1 |
OTHER | <0.05 |
Alumina ceramic performance index (Notice of Correct in Leakeage Rate)
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | - |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Cold compressive strength | MPa | 350 |
6 | 20ºC leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600ºC |
8 | Bonding in high temperature | not bonded in 1600ºC | |
9 | 20-1000ºC coefficient ofthermalexpansion | mm.10-6/ºC.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20ºCdirect current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000ºC MΩ | ≥0.08 |
1300ºC MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550ºC | |
15 | Maximum working temperature | ºC | 1800 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.