-
Alumina ceramic tube (internal thread)
The customer found us through our company's website. Sent us an email and attached the drawings.
Details -
Alumina ceramic tube (extrusion process)
Squeeze forming method: This forming technology has a simple shape and is limited to workpieces with an internal thickness exceeding 1mm and a diameter and length of 4:1 or less.
Details -
Finished product screening
The drying of the pipes is completed, and the workers conduct preliminary screening. Confirm the quantity of qualified products.
Details -
Large diameter alumina ceramic tube semi-finished products
Sintering: Sintering the dried body, usually using high-temperature sintering method. Sintering temperature and time depend on the product
Details -
DemoldingSemi-finished integrated pipe
Drying: Dry the formed green body, usually using natural drying or oven drying methods to remove moisture from the green body forming
Details -
Slip casting and drying process
Slip casting molding is actually a molding method that has been used for alumina ceramics for a long time. Because gypsum molds are mainly used, the cost is relatively low and it is also relatively easy to shape.
Details