What are we going to do to increase the plasticity of alumina ceramic tubes?
What are we going to do to increase the plasticity of alumina ceramic tubes?
Generally speaking, in order to increase the plasticity of alumina ceramic tubes, we can directly meet the size and corrosion resistance of our users in use. For alumina ceramic tubes, it is in production. For sure, our hot pressing process is indispensable, and there are many aspects to the treatment measures.
First of all, in terms of pre-compression treatment, its main purpose is to prevent our alumina ceramic tube from directly displacing when it is loaded into the hot press. It causes a series of defects such as core stacking and separation from the seam. After it is assembled, that is, before hot pressing, it must be directly pre-pressed at room temperature. In this way, it can also be made Direct bonding into a whole material.
The next words are about a hot pressing treatment of alumina ceramic tubes. For this treatment, we actually use the hot gluing process. As far as the hot pressing temperature is concerned, it is usually about 140C. In terms of unit pressure, it is actually 2.5-3.0MPa.
Finally, if we want to improve the plasticity of the alumina ceramic tube, we actually need to perform a three-stage pressure reduction process, when it is in a process of hot pressing post-processing. As far as the first paragraph is concerned, it actually means that the working pressure drops directly to "balance pressure". As for the second paragraph, that is, the "balance pressure" drops directly to zero. For the third paragraph, That is, from zero directly to the ceramic riser tube to complete its opening.
In the end, if it has gone through the above three aspects, for its alumina ceramic tube, when it is hot-pressed, it will meet the needs of its use to the greatest extent. In fact, we should also pay attention to it. As for the alumina ceramic tube, it is actually necessary to directly implement the compression link in multiple occasions where it is used.
