Alumina Industrial Ceramic Tube
- YUNXING
- China Jinzhou
- 5-30 Days
- 5,000-10,000/month(Looking for distributors)
1.Alumina industrial ceramic tube have excellent wear resistance and long service life.
2.Alumina industrial ceramic tube have a smooth surface and low friction coefficient.
3.Alumina industrial ceramic tube have low volume density and light weight.
4.Alumina industrial ceramic tube can resist corrosion from various acids, alkalis, and salts, with a hardness second only to diamonds.
ALUMINA INDUSTRIAL CERAMIC TUBE
My factory looking for distributors.
Advantages of alumina industrial ceramic tube
1.Alumina industrial ceramic tube have excellent wear resistance and long service life.
2.Alumina industrial ceramic tube have a smooth surface and low friction coefficient.
3.Alumina industrial ceramic tube have low volume density and light weight.
4.Alumina industrial ceramic tube can resist corrosion from various acids, alkalis, and salts, with a hardness second only to diamonds.
5.The thermal expansion coefficient and thermal conductivity of alumina industrial ceramic tube are low, and the working temperature can reach 1700 ℃.
Application of alumina industrial ceramic tube
Alumina industrial ceramic tubes are commonly used in traditional industrial ovens and furnaces.
Alumina industrial ceramic tubes are used as insulators for electrical connections.
Alumina industrial ceramic tubes are used as heat-resistant supports, sample racks, and drums in kilns.
Alumina industrial ceramic tubes are used as spray tubes and gas nozzles.
Alumina industrial ceramic tubes are used as protective tubes and ceramic insulators for thermocouples.
Recommended products:
Ceramic cone crucible:
Fire resistance, corrosion resistance and wear resistance.
Used in metallurgy, chemical industry, papermaking and other industries.
Ceramic tray：
Corrosion resistance, high fire resistance and good chemical stability.
Used in laboratory extraction, burning, mineral, chemical and other industries.
Alumina Tube(open both ends)(slip casting) Specification Table
Number | SPEC: OD x ID |
LENGTH MM |
Number | SPEC: OD x ID |
LENGTH MM | ||
INCH | MM | INCH | MM | ||||
1 | 0.197x0.118 | 5x3 | ≤800 | 32 | 1.126x0.886 | 28.6x22.5 |
≤1800 |
2 | 0.236x0.157 | 6x4 |
≤1300 | 33 | 1.181x0.827 | 30x21 | |
3 | 0.250x0.125 | 6.4x3.2 | 34 | 1.181x0.906 | 30x23 | ||
4 | 0.250x0.157 | 6.4x4 | 35 | 1.260x0.984 | 32x25 | ||
5 | 0.250x0.188 | 6.4x4.8 | 36 | 1.375x1.125 | 34.9x28.6 | ||
6 | 0.276x0.157 | 7x4 | 37 | 1.378x1.063 | 35x27 | ||
7 | 0.276x0.197 | 7x5 | 38 | 1.496x1.181 | 38x30 | ||
8 | 0.315x0.197 | 8x5 | 39 | 1.575x1.181 | 40x30 | ||
9 | 0.354x0.236 | 9x6 |
≤1600 | 40 | 1.654x1.339 | 42x34 | |
10 | 0.375x0.250 | 9.6x6.4 | 41 | 1.750x1.500 | 44.5x38.1 | ||
11 | 0.394x0.236 | 10x6 | 42 | 1.811x1.496 | 46x38 | ||
12 | 0.394x0.276 | 10x7 | 43 | 1.875x1.625 | 47.6x41.3 | ||
13 | 0.433x0.276 | 11x7 | 44 | 1.969x1.575 | 50x40 | ||
14 | 0.472x0.236 | 12x6 | 45 | 2.000x1.750 | 50.8x44.5 | ||
15 | 0.472x0.315 | 12x8 | 46 | 2.250x2.000 | 57.2x50.8 | ||
16 | 0.472x0.355 | 12x9 | 47 | 2.283x1.890 | 58x48 | ||
17 | 0.500x0.250 | 12.7x6.4 | 48 | 2.362x1.96 | 60x50 | ||
18 | 0.500x0.375 | 12.7x9.5 | 49 | 2.500x2.250 | 63.5x57.2 | ||
19 | 0.551x0.394 | 14x10 | 50 | 2.559x2.165 | 65x55 | ||
20 | 0.591x0.394 | 15x10 |
≤1800 | 51 | 2.750x2.500 | 69.9x63.5 | |
21 | 0.630x0.472 | 16x12 | 52 | 2.756x2.362 | 70x60 | ||
22 | 0.669x0.472 | 17x12 | 53 | 2.956x2.561 | 75x65 | ||
23 | 0.688x0.437 | 17.5x11.1 | 54 | 3.000x2.750 | 76x70 | ||
24 | 0.750x0.512 | 19.1x13 | 55 | 3.150x2.675 | 80x68 | ||
25 | 0.787x0.591 | 20x15 | 56 | 3.500x3.125 | 88.9x79.4 |
≤1600 | |
26 | 0.866x0.630 | 22x16 | 57 | 3.543x3.150 | 90x80 | ||
27 | 0.866x0.669 | 22x17 | 58 | 3.937x3.543 | 100x90 | ||
28 | 0.945x0.709 | 24x18 | 59 | 4.000x3.650 | 101.6x93 | ||
29 | 1.000x0.750 | 25.4x19.1 | 60 | 4.331x3.937 | 110x100 |
≤1500 | |
30 | 1.063x0.669 | 27x17 | 61 | 4.500x4.125 | 114.3x105 | ||
31 | 1.063x0.787 | 27x20 | 62 | 4.724x4.331 | 120x110 | ||
Alumina ceramic performance index (Notice of Correct in Leakeage Rate）
NO. | Property | Unit | Alumina |
1 | Al2O3 | % | >99.3 |
2 | SiO2 | % | — |
3 | Density | g/cm3 | 3.88 |
4 | Water absorption | % | 0.01 |
5 | Compressive strength | MPa | 2300 |
6 | 20℃ leakage rates | Torr・L/sec | >10-11=1.33322×10-12Pa・m3/sec |
7 | Twisting in high temperature | mm | 0.2 allowed in 1600℃ |
8 | Bonding in high temperature | not bonded in 1600℃ | |
9 | 20—1000℃ coefficient of thermal expansion | mm.10-6／℃.m | 8.2 |
10 | Thermal conductivity | W/m.k | 25 |
11 | Electric insulation strength | KV/mm | 20 |
12 | 20℃direct current insulation resistance | Ohm/cm | 1014 |
13 | High-temperature insulation resistance | 1000℃ MΩ | ≥0.08 |
1300℃ MΩ | ≥0.02 | ||
14 | Thermal shock resistance | 4 times not cracked in 1550℃ | |
15 | Maximum working temperature | ℃ | 1800 |
16 | Hardness | Mohs | 9 |
17 | Flexural strength | Mpa | 350 |
Our factory
Jinzhou Yunxing Industrial Ceramics Co., Ltd. was established in 2000, mainly producing various types of tubular ceramic products and various industrial parts with alumina content above 99.3%. The factory covers an area of 4000 square meters.
The company's main products are: alumina ceramic tubes, alumina ceramic crucibles, alumina ceramic rods, alumina ceramic boats, alumina ceramic plates, alumina ceramic parts, etc.
The company currently has 3 1800 ° C high-temperature furnaces and 2 1400 ° C low-temperature kilns independently designed and manufactured. The molding process is mainly based on grouting molding, and has other molding process equipment such as extrusion and hot die casting.
The company has 105 employees, including one senior ceramic engineer, three engineers, six overseas sales staff, and four professional after-sales staff.
FAQ
1.What is the difference between ceramic and alumina?
Ceramics are non-metallic, inorganic materials that are typically composed of a combination of metallic and non-metallic elements. Alumina is a type of ceramic oxide, specifically an oxide of aluminum. It is widely used in various applications due to its excellent mechanical, thermal, and electrical properties.
2.What is alumina ceramic used for?
Everything You Need to Know about Alumina Ceramics
Because of their excellent chemical stability, alumina ceramics are used widely in acid-resistant pump impellers, pump bodies, acid-carrying pipe linings and valves. Aluminum oxide ceramics are used in the manufacture of textile wear parts and knives. This is due to their extreme hardness and wear resistance.
3.Is alumina ceramic hard?
Alumina is a very hard ceramic that is excellent at resisting abrasion and is ideal for wear-resistant inserts or products.
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T;
7. Shipment: by sea, by air, by courier, by post, etc.
Certification
Feedback
1. If you have any questions or questions, please contact us and we will communicate with you as soon as possible.
2. For any other satisfaction, please also feedback to us to make our service better and better.
